Ductile iron—also referred to as spheroidal or nodular iron—is actually a group of irons that exhibit high strength, flexibility, durability, and elasticity due to their unique microstructure. Cast ductile iron normally contains over 3 percent carbon; it can be bent, twisted, or deformed without fracturing. Its mechanical properties are similar to steel, and far exceed those of standard cast irons.
Ductile iron castings are solid metal objects that result from molten ductile iron being poured into voids in a mold. The ductile iron subsequently cools and solidifies in the shape of the void it occupies.
What is Ductile Iron?
Invented in 1943, ductile iron is a modern iteration of cast iron. Cast iron and ductile iron have contrasting physical properties caused by differences in their microstructures.
The graphite and carbon contained in cast iron occur as flakes; cast iron exhibits positive compressive load capabilities, but tensile loading above its natural tensile strength can cause cracks to form and propagate rapidly out from stress points within the flaked graphite microstructure. As a result, cast iron has virtually no elongation. It is a brittle material, and therefore limited in its use in tensile and shock loading applications.
The graphite within ductile iron occurs as spheroids, so it is sometimes referred to as spheroidal graphite. Similarly, the term nodular iron stems from the fact that the carbon contained in ductile iron is held in the form of nodules. This unique microstructure causes ductile iron to withstand bending and shock loading far better than traditional cast iron.
Advantages of Ductile Iron
There are several advantages that ductile iron provides designers:
1. Ductile iron can be easily cast and machined.
2. It has an excellent strength to weight ratio.
3. Ductile iron can be made for a much lower cost than steel.
4. It has superior castability and machinability.
5. Ductile iron provides a designer with an exceptional combination of toughness, low cost manufacturing, and reliability.
ABOUT KEVA
Keva Casting is a professional casting company that focuses on Construction, Machinery, Automobile, Hardware, Pipeline and many other industries.
We provide top quality products with the best service based on our complete production chain including our own mold design, advanced production techniques, and full management of the supply chain. Keva Casting has two factories located in Zhucheng, China's Shandong province.
We use "shell molding", which is a new technique that has been developed in recent years.This new technique has simplified production procedures and reduced air pollution compared with traditional sand casting and investment casting. Shell making and core making are faster to ensure production in enormous quantities. The dimensions and surface finishing are satisfactory for all kinds of industrial requirements. Besides supplying our own formwork & scaffolding systems, our casting products also supply OEM services in various industries.